-14%
Teltonika is highly reliable Ethernet Router with Dual Band WiFi 5 802.11ac and Bluetooth LE module
Teltonika RUTX10 is highly reliable and secure router for professional applications.
Original price was: $394.90.$341.00Current price is: $341.00. (inc. of GST)
- Description
- Specifications
- Resources
- Reviews
Description
Next-Generation Teltonika Enterprise router, equipped with the Dual Band WiFi 5 802.11ac and a Bluetooth LE module. Perfect for Small office or Public sector applications. High speed WiFi connectivity allows companies to transition into all-wireless office settings.
We created RUTX10 Enterprise module specially for small to mid-size office application. It comes with Dual Band WiFi 5 802.11ac, that is extremely important for high data transmission and lag-free browsing experience. RUTX10 has all the latest security features and ability to monitor and control your office data usage remotely.
Highly customizable RutOS is at the soul of RUTX10, but it’s actually synergy between hardware and software that makes this device perfect performer in enterprise solutions. Quad Core ARM Cortex A7 717 MHz CPU is more than enough for VPN functionality and if what we offer is not enough there is 256 MBytes Flash memory to install additional protocols.
| ETHERNET | |
|
1x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
|
3x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| WIRELESS | |
|
802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) |
|
WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
|
ESSID stealth mode |
|
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
| BLUETOOTH | |
|
Bluetooth low energy (LE) for short range communication |
| NETWORK | |
|
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
|
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL) |
|
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
|
Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection |
|
Port forwards, traffic rules, custom rules |
|
Static and dynamic IP allocation, DHCP Relay, Relayd |
|
Traffic priority queuing by source/destination (planned), service (planned), protocol or port (planned), WMM, 802.11e |
|
Supported >25 service providers, others can be configured manually |
|
VRRP, Wired and WiFi WAN options, each of which can be used as an automatic Failover |
|
Possibility to mount remote file system via SSH protocol (not available in standard FW) |
| SECURITY | |
|
Pre-shared key, digital certificates, X.509 certificates |
|
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
|
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
|
Port based and tag based VLAN separation WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only |
|
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
| VPN | |
|
Multiple clients and a server can run simultaneously, 12 encryption methods |
|
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
|
IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) |
|
GRE tunnel |
|
Client/Server instances can run simultaneously |
|
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program's code |
|
Method of building scalable IPsec VPNs |
|
SSTP client instance support |
| MODBUS | |
|
ID range 1-255 |
|
Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit float (Big endian, Big endian with byte-swapped, Little endian, Little endian with byte-swapped) |
| MONITORING & MANAGEMENT | |
|
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
|
Firmware update from server, automatic notification |
|
SSH (v1, v2) |
|
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
|
SNMP (v1, v2, v3), SNMP trap |
|
MQTT Broker, MQTT publisher |
|
Management API over HTTP/HTTPS |
|
Teltonika Remote Management System (RMS) |
| SYSTEM CHARACTERISTICS | |
|
Quad-core ARM Cortex A7, 717 MHz |
|
256 MB, DDR3 |
|
256 MB SPI Flash |
| FIRMWARE / CONFIGURATION | |
|
Update FW from file, check FW on server, configuration profiles, configuration backup |
|
Update FW/configuration from server |
|
Update FW/configuration for multiple devices at once |
|
Update FW without losing current configuration |
| INPUT/OUTPUT | |
|
1x Digital Input |
|
1x Digital Output |
|
SMS, Email, RMS |
| POWER | |
|
4 pin industrial DC power socket |
|
9 - 50 VDC, reverse polarity protection, voltage surge/transient protection |
|
Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at standards |
|
11 W Max |
| PHYSICAL INTERFACES (PORTS, LEDS, BUTTONS) | |
|
4x RJ45 ports, 10/100/1000 Mbps |
|
1 Digital Input, 1 Digital Output on 4 pin power connector |
|
8x LAN status LEDs, 1x Power LED, 2.4G and 5G WiFi LEDs |
|
4 pin DC connector |
|
2x RP-SMA for WiFi, 1x RP-SMA for Bluetooth |
|
USB A port for external devices |
|
Factory reset button |
| PHYSICAL SPECIFICATION | |
|
Full aluminium housing |
|
115 mm x 95 mm x 32 mm (H x W x D) |
|
355 g |
|
DIN rail (can be mounted on two sides), flat surface placement |
| OPERATING ENVIRONMENT | |
|
-40 C to 75 C |
|
10 % to 90 % non-condensing |
|
IP30 |