Teltonika RUTX14 – Instant LTE Failover | Reliable and Secure CAT12 4G LTE Router/Firewall with Dual Band WiFi 802.11ac, GNSS/GPS and Bluet

Teltonika RUTX14 – Instant LTE Failover | Reliable and Secure CAT12 4G LTE Router/Firewall with Dual Band WiFi 802.11ac, GNSS/GPS and Bluet

Availability: Out of stock SKU: RUTX14000300 Category:

$842.00 (inc. of GST)

Teltonika
Availability: Out of stock

Description

RUTX14 is the fastest single modem LTE router in our portfolio.

5 x Gigabit Ethernet ports, Wave-2 802.11ac Dual-Band Wi-Fi, Bluetooth LE, USB interfaces, dual SIM for advanced throughput and ultra-reliable connectivity.

Equipped with advanced security features like multiple VPN’s, firewall & cyber attack prevention.

Combination of fast LTE CAT12 connectivity, wide range of physical interfaces, extensive RutOS functionality and great remote management capabilities make this device an excellent choice for primary or backup connectivity.

What’s in it for you?

  • 4G LTE CAT12:Download up to 600 Mbps. Upload up to 150 Mbps
  • WIFI & BT:Wave-2 802.11ac Dual Band WIFI and Bluetooth LE
  • DUAL SIM:With auto failover, backup WAN and other switching scenarios
  • LOAD BALANCING:Allows to use multiple WAN sources to increase throughput
  • GNSS:Global Navigation Satellite System for location services with geofencing functionality
  • RMS:Compatible with Teltonika Remote Management System

 

 
MOBILE
Mobile module
  • 4G (LTE) – Cat 12 up to 600 Mbps, 3G – up to 42 Mbps
SIM/mobile module switch
  • 2 SIM cards, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail
Status
  • Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID,
SMS
  • SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto replay
Black/White list (planned)
  • Operator black/white list
Multiple PDN
  • Possibility to use different PDNs for multiple network access and services
Band management
  • Band lock, Used band status display
APN
  • Auto APN
Bridge mode
  • Direct connection (bridge) between mobile ISP and device on LAN
WIRELESS
Wireless mode
  • 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi security
  • WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID
  • ESSID stealth mode
WiFi users
  • up to 150 simultaneous connections
Wireless Hotspot
  • Captive portal (Hotspot), internal/external Radius server, built in customizable landing page
ETHERNET
WAN
  • 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN
  • 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
BLUETOOTH
Bluetooth 4.0
  • Bluetooth low energy (LE) for short range communication
NETWORK
Routing
  • Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Network protocols
  • TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA
VoIP passthrough support
  • H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring
  • Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall
  • Port forwards, traffic rules, custom rules
DHCP
  • Static and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM)
  • Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS
  • Supported >25 service providers, others can be configured manually
Network backup
  • VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
Load balancing
  • Balance Internet traffic over multiple WAN connections
SSHFS
  • Possibility to mount remote file system via SSH protocol
SECURITY
Authentication
  • Pre-shared key, digital certificates, X.509 certificates
Firewall
  • Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention
  • DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN
  • Port and tag based VLAN separation
Mobile quota control
  • Custom data limits for both SIM cards
WEB filter
  • Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control
  • Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN
  • Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN Encryption
  • DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPsec
  • IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GRE
  • GRE tunnel
PPTP, L2TP
  • Client/Server instances can run simultaneously, L2TPv3 support
Stunnel
  • Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN
  • Method of building scalable IPsec VPNs
SSTP
  • SSTP client instance support
ZeroTier
  • ZeroTier VPN client support
WireGuard
  • WireGuard VPN client and server support
MODBUS TCP SLAVE
ID filtering
  • Respond to one ID in range [1;255] or any
Allow remote access
  • Allow access through WAN
Custom registers
  • Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality
MODBUS TCP MASTER
Supported functions
  • 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats
  • 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
Gateway
  • Allows sending commands and receiving data from MODBUS Master through the MQTT broker
DNP3
Supported modes
  • TCP Master, DNP3 Outstation
DATA TO SERVER
Protocols
  • HTTP(S), MQTT, Azure MQTT, Kinesis
IoT PLATFORMS
Clouds of things
  • Allows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorx
  • Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
Cumulocity
  • Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT Hub
  • Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
MONITORING & MANAGEMENT
WEB UI
  • HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA
  • Firmware update from server, automatic notification
SSH
  • SSH (v1, v2)
SMS
  • SMS status, SMS configuration, send/read SMS via HTTP POST/GET
CALL
  • Reboot, Status, Mobile data on/off, Output on/off
TR-069
  • OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT
  • MQTT Broker, MQTT publisher
SNMP
  • SNMP (v1, v2, v3), SNMP trap
JSON-RPC
  • Management API over HTTP/HTTPS
MODBUS
  • MODBUS TCP status/control
RMS
  • Teltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPU
  • Quad-core ARM Cortex A7, 717 MHz
RAM
  • 256 MB, DDR3
FLASH storage
  • 256 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UI
  • Update FW from file, check FW on server, configuration profiles, configuration backup
FOTA
  • Update FW/configuration from server
RMS
  • Update FW/configuration for multiple devices at once
Keep settings
  • Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system
  • RutOS (OpenWrt based Linux OS)
Supported languages
  • Busybox shell, Lua, C, C++
Development tools
  • SDK package with build environment provided
LOCATION TRACKING
GNSS
  • GPS, GLONASS, BeiDou, Galileo and QZSS
Coordinates
  • GNSS coordinates via WebUI, SMS, TAVL, RMS
NMEA
  • NMEA 0183
Server software
  • Supported server software: TAVL, RMS
Geofencing
  • Configurable multiple geofence zones
USB
Data rate
  • USB 2.0
Applications
  • Samba share, USB-to-serial
External devices
  • Possibility to connect external HDD, flash drive, additional modem, printer
Storage formats
  • FAT, FAT32, NTFS
INPUT/OUTPUT
Input
  • 1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high
Output
  • 1 x Digital Output, Open collector output, max output 30 V, 300 mA
Events
  • SMS, Email, RMS
I/O juggler
  • Allows to set certain I/O conditions to initiate event
POWER
Connector
  • 4 pin industrial DC power socket
Input voltage range
  • 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive)
  • Passive PoE. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
Power consumption
  • Idle: <4 W, Max: <22 W
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet
  • 5 x RJ45 ports, 10/100/1000 Mbps
I/Os
  • 1 x Digital Input, 1 x Digital Output on 4 pin power connector
Status LEDs
  • 2 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
SIM
  • 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders
Power
  • 1 x 4 pin DC connector
Antennas
  • 4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS
USB
  • 1 x USB A port for external devices
Reset
  • Reboot/User default reset/Factory reset button
Other
  • 1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material
  • Full aluminium housing
Dimensions (W x H x D)
  • 132 x 44 x 95 mm
Weight
  • 515 g
Mounting options
  • DIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
Operating temperature
  • -40 C to 75 C
Operating humidity
  • 10 % to 90 % non-condensing