ALLOY PoE PSE Gigabit Ethernet Media Converter 1000base-t to 1000base-lx (LC), LFP, 10km Converters – POE2000LC.10
It can be used to power PD (Powered Device) PoE equipment such as IP phones and IP cameras via UTP or STP data cable.
Original price was: $834.90.$619.00Current price is: $619.00. (inc. of GST)
- Description
- Specifications
- Resources
- Reviews
Description
The POE2000LC.10 Gigabit Ethernet PoE Media Converter, a POE2000 Series model, has a 10/100/1000Mbps PoE RJ-45 and a LC type singlemode fibre port. Power PoE PD devices such as IP Phones and support copper-to-fibre media conversion with 10Km range.
The POE2000LC.10 Gigabit Ethernet PoE Media Converter is a dual purpose device. It supports media conversion applications between Gigabit Ethernet 10/100/1000Base-T over UTP/STP copper cable and LC terminated 1000Base-LX over singlemode fibre cable, supporting ranges of up to 10 kilometres. The device also supports IEEE 802.3af compliant Power over Ethernet (PoE) applications, and can be used to power PD (Powered Device) PoE equipment such as IP phones and IP cameras via UTP or STP data cable.
The POE2000LC.10 is a model from Alloy’s POE2000 Series of PoE Media Converters. As a Media Converter, models in the series support most types of Gigabit media conversion, including 10/100/1000Mbps RJ-45 copper to 1000Base-SX multimode fibre (with either LC, SC or ST connectors, maximum link range of 550 metres), 10/100/1000Mbps RJ-45 copper to 1000Base-LX singlemode fibre (LC or SC connectors for 10, 30 or 50Km ranges), 10/100/1000Mbps RJ-45 copper to SFP providing 1000Base-SX/LX singlemode fibre (via SFP slot installed mini-GBIC modules), and 10/100/1000Mbps RJ-45 copper to 1000Base-LX WDM singlemode/singlecore fibre (SC connector, 20Km range).
The PoE capability of POE2000 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable / disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults.
What’s in it for you?
- Power PoE PD devices such as IP Phones, IP Cameras over UTP data cable
- IEEE 802.3af PoE (Power over Ethernet) PSE compatible
- Comprehensive PoE functions: PD Signature Sensing, power monitoring and current protection
- Supports Gigabit media conversion: copper-to-fibre and mutimode/singlemode fibre-to-fibre
- 10/100/1000Mbps auto-negotiation on RJ-45 copper port
- Maximum fibre link ranges: 50kms (fixed fibre port models), 20Kms (WDM models) or 120 Kms (SFP model)
- Supports 100Base-T and 100Base-TX copper-to-fibre media conversion
- LC, SC and ST fixed fibre port connector models
- Flexible SFP fibre interface model – install Alloy or third party mini-GBIC modules
- WDM models for 1000Base-LX singlemode/singlecore media conversion
- Far-End-Fault and Forced mode LFP supports easy link fault monitoring and auto link shutdown
Standards Compliance |
IEEE802.3af Power over Ethernet |
IEEE 802.3 10Base-T specification |
IEEE 802.3u 100Base-TX specification |
IEEE 802.3ab 1000Base-T specification |
IEEE 1000Base-SX Gigabit Ethernet fibre specification |
IEEE 1000Base-LX Gigabit Ethernet fibre specification |
IEEE 802.3x full-duplex flow control specification |
Interface/Protocol/Wavelength/Range Specifications |
This Model |
POE2000LC.10: RJ-45 PoE 1000Base-T to 1000Base-LX (LC), singlemode fibre, 1310nm, max range 10Km |
Other POE2000 Series Models |
POE2000SFP: RJ-45 PoE 1000Base-T to SFP (fibre cable type/grade/wavelength/range determined by mini-GBIC module) |
POE2000LC: RJ-45 PoE 1000Base-T to 1000Base-SX (LC), multimode fibre, 850nm, max range 550m |
POE2000SC: RJ-45 PoE 1000Base-T to 1000Base-SX (SC), multimode fibre, 850nm, max range 550m |
POE2000ST: RJ-45 PoE 1000Base-T to 1000Base-SX (ST), multimode, 850nm, max range 550m |
POE2000SC.10: RJ-45 PoE 1000Base-T to 1000Base-LX (SC), singlemode fibre, 1310nm, max range 10Km |
POE2000LC.30: RJ-45 PoE 1000Base-T to 1000Base-LX (LC), singlemode fibre, 1310nm, max range 30Km |
POE2000SC.30: RJ-45 PoE 1000Base-T to 1000Base-LX (SC), singlemode fibre, 1310nm, max range 30Km |
POE2000LC.50: RJ-45 PoE 1000Base-T to 1000Base-LX (LC), singlemode fibre, 1310nm, max range 50Km |
POE2000SC.50: RJ-45 PoE 1000Base-T to 1000Base-LX (SC), singlemode fibre, 1310nm, max range 50Km |
POE2000SC3.20: RJ-45 PoE 1000Base-T to 1000Base-LX WDM (SC) singlemode/core fibre, 1310nm Tx, up to 20Km |
POE2000SC5.20: RJ-45 PoE 1000Base-T to 1000Base-LX WDM (SC) singlemode/core fibre, 15500nm Tx, up to 20Km |
RJ-45 Port |
10/100/1000Mbps throughput |
NWay auto-negotiation |
Auto-MDIX |
Full/Half-Duplex transmission |
IEEE 802.3af compliant PoE |
Fibre Optic Ports |
Multimode and Singlemode Models |
1000Mbps throughput |
Auto-negotiation |
Transmission: Full-duplex only |
WDM Models |
1000Mbps throughput |
Auto-negotiation |
Transmission: Full-duplex only |
Single core of singlemode fibre cable used |
TX and RX 1310/1550nm datastreams multiplexed on a single fibre core |
A pair of POE2000SC3.20 and POE2000SC5.20 Converters must be used at either end of the fibre link or: |
One POE2000SC3.20 (1310nm Tx) or POE2000SC5.20 (1550nm Tx) and a suitable wavelength device at other end of link |
Cable Types Supported |
RJ-45 Port: UTP or STP Cat 5 or higher (must be Cat 5 or higher in Gigabit Ethernet networks) |
SFP Slot (SFP model): fibre cable type determined by installed mini-GBIC Transceiver module |
LC/SC/ST Ports (multimode models): 50/125µm, 62.5/125µm or 100/140µm |
LC/SC/ST Ports (singlemode/WDM models): 8.3/125µm, 8.7/125µm, 9/125µm or 10/125µm |
Power over Ethernet Specifications |
IEEE 802.3af Power over Ethernet compliant |
PSE (Power Sourcing Equipment) functionality |
PD Class 0 (0.44 to 13 watt supply) |
PD Class 1 (0.44 to 3.8 watt supply) |
PD Class 2 (3.8 to 6.5 watt supply) |
PD Class 3 (6.5 to 13 watt supply) |
Signature sensing |
Power monitoring functions including PD (Powered Device) discovery, classification, current limiting etc |
PD Power-out auto-detection |
PD Over-current and Under-current power protection functions |
Fault Protection Input |
Minimum load sensing |
PSE MDI power enable/disable |
LFP (Link Fault Passthrough) Functions |
LED status propagation |
Far End Fault mode supported: link pulse to link partner terminated on loss of the fibre RX signal |
Forced mode supported: TX signal auto-disabled, LED link fault status propagated |
Other Functions |
Jumbo frame (Normal Mode: 2KB, Cut-Through Mode: 9KB) |
DIP Switch Configuration |
DIP 1: LFP Enabled/LFP disabled |
DIP 2: PoE Enabled/PoE disabled |
DIP 3: Bridge Mode enabled/Cut Through Mode enabled |
LED Indicators |
PWR: Green, lit when +5V power source active |
FX LNK/ACT: Lit - fibre port link good; Blink - fibre traffic is present |
TP LNK/ACT: Lit - TP link good; Blinks - TP traffic is present |
TP SPEED: Green Lit - TP speed 1000Mbps; Yellow Lit - speed 100Mbps; Off - speed 10Mbps |
PoE PSE-TP: Green Lit - PoE power supply active; Red Lit - PoE power supply disrupted |
4W: Green Lit - supplying PD Class 1 power |
7W: Green Lit - supplying PD Class 2 power |
15.4W: Green Lit - supplying PD Class 0 or 3 power |
Power |
100–240VAC, 47 –63 Hz internal power supply |
Maximum consumption: 19W |
Electromagnetic Compatibility |
FCC Part 15 Class A, CE Mark, C-Tick |
Mechanical |
Form Factor: Standalone Desktop all-metal case |
Dimensions: 133mm x 158mm x 40mm (D x W x H) |
Weight: 750 grams |
Environmental Specifications |
Temperature: 0° to 50°C (Standard Operating) |
Humidity: 5% to 90% (Standard operating) |