ALLOY PoE PSE Fast Ethernet Media Converter 100base-tx to 100base-fx (ST), LFP, 2Km Converters – POE200ST
It can be used to power PD (Powered Device) PoE equipment such as IP phones and IP cameras via UTP or STP data cable
Original price was: $350.90.$255.00Current price is: $255.00. (inc. of GST)
- Description
- Specifications
- Reviews
Description
The Alloy POE200ST Fast Ethernet PoE Media Converter, a POE200 Series model, has a 10/100Mbps PoE RJ-45 port and a ST terminated multimode fibre port. It is used to power PoE PD devices such as IP Phones and support copper-to-fibre 100Mbps conversion.
The POE200ST Fast Ethernet PoE Media Converter is a dual purpose device. It supports media conversion applications between Fast Ethernet 10/100Base-TX over UTP/STP copper cable and ST terminated 100Base-FX over multimode fibre cable, supporting ranges of up to 2 kilometres. The device also supports IEEE 802.3af compliant Power over Ethernet (PoE) applications, and can be used to power PD (Powered Device) PoE equipment such as IP phones and IP cameras via UTP or STP data cable.
The Alloy POE200ST Media Converter is a model from Alloy’s POE200 Series of PoE Media Converters. As a Media Converter, models in the series support most types of Fast Ethernet copper-to-fibre media conversion, including 10/100Mbps RJ-45 copper to 100Base-FX multimode fibre (with either LC, SC or ST connectors, maximum link range of 2 kilometres) and 10/100Mbps RJ-45 copper to 100Base-FX singlemode fibre (SC connectors for 20 or 40Km ranges).
The PoE capability of Alloy POE200 Series Media Converters is comprehensive; as a PSE device, all models support signature sensing, power monitoring functions including PD discovery, classification and current limiting, PD power-out auto-detection, PD over and under current power protection, fault protection input, minimum load sensing and PSE MDI power enable / disable. All models automatically discover PD PoE devices, power them over UTP data cable to a maximum of 15.4 watts, monitor power supply, indicate operating and fault status via a comprehensive LED suite, and protect from power faults.
POE200 Series Converters also support Link Fault Passthrough via Far-end-Fault (FEF) mode. LFP allows POE200 Series Media Converters to monitor both the fibre and copper RX ports for signal loss. In the case of a loss of RX signal on one media port, the Converter will automatically disable the TX signal to the other media port, thus passing through the link fault LED status. FEF mode enables the Converter to stop sending a link pulse to a LFP capable Converter on the other end of the cable; the link partner Converter will synchronously stop sending data, preventing loss of valuable data transmitted over an invalid link.
What’s in it for you?
- Power PoE PD devices such as IP Phones, IP Cameras over UTP data cable
- IEEE 802.3af PoE (Power over Ethernet) PSE compliant
- Comprehensive PoE functions: PD Signature Sensing, power monitoring and current protection
- Supports Fast Ethernet copper-to-fibre mutimode or singlemode media conversion
- 10/100Mbps auto-negotiation on RJ-45 copper port
- Maximum fibre link ranges: 40kms
- LC, SC and ST fibre port connector models
- Far-End-Fault and Forced mode LFP supports easy link fault monitoring and auto link shutdown
| Standards Compliance |
| IEEE802.3af Power over Ethernet |
| IEEE 802.3 10Base-T specification |
| IEEE 802.3u 100Base-TX specification |
| IEEE 100Base-FX Fast Ethernet fibre specification |
| IEEE 802.3x full-duplex flow control specification |
| Interface/Protocol/Wavelength/Range Specifications |
| This Model |
| POE200ST: RJ-45 PoE PSE 100Base-TX to 100Base-FX (ST), multimode fibre, 1310nm, max range 2Km |
| Other POE200 Series Models |
| POE200LC: RJ-45 PoE PSE 100Base-TX to 100Base-FX (LC), multimode fibre, 1310nm, max range 2Km |
| POE200SC: RJ-45 PoE PSE 100Base-TX to 100Base-FX (SC), multimode fibre, 1310nm, max range 2Km |
| POE200SC.20: RJ-45 PoE PSE 100Base-TX to 100Base-FX (ST), singlemode fibre, 1310nm, max range 20Km |
| POE200SC.40: RJ-45 PoE PSE 100Base-TX to 100Base-FX (ST), singlemode fibre, 1310nm, max range 40Km |
| RJ-45 Port |
| 10/100Mbps throughput |
| NWay auto-negotiation |
| Auto-MDI |
| Full/Half-Duplex transmission |
| IEEE 802.3af compliant PoE |
| Fibre Optic Ports |
| 100Mbps throughput |
| Auto-negotiation |
| Transmission: Full-duplex or Half-duplex |
| Cable Types Supported |
| RJ-45 Port: UTP or STP Cat.3 or higher (must be Cat.5 or higher for Fast Ethernet networks) |
| LC/SC/ST Ports (multimode models): 50/125µm, 62.5/125µm or 100/140µm |
| SC Ports (singlemode/WDM models): 8.3/125µm, 8.7/125µm, 9/125µm or 10/125µm |
| Power over Ethernet Specifications |
| IEEE 802.3af Power over Ethernet compliant |
| PSE (Power Sourcing Equipment) functionality |
| PD Class 0 (0.44 to 13 watt supply) |
| PD Class 1 (0.44 to 3.8 watt supply) |
| PD Class 2 (3.8 to 6.5 watt supply) |
| PD Class 3 (6.5 to 13 watt supply) |
| Signature sensing |
| Power monitoring functions including PD (Powered Device) discovery, classification, current limiting etc |
| PD Power-out auto-detection |
| PD Over-current and Under-current power protection functions |
| Fault Protection Input |
| Minimum load sensing |
| PSE MDI power enable/disable |
| Power Feeding Support |
| Via TP Pins 1, 2, 3 and 6 |
| LFP (Link Fault Passthrough) Functions |
| LED status propagation |
| Far End Fault mode supported: link pulse to link partner terminated on loss of the fibre RX signal |
| DIP Switch Configuration |
| DIP 1: TP Auto-negotiation enabled/disabled |
| DIP 2: Force TP 10Mbps/100Mbps |
| DIP 3: Force TP duplex mode Half/Full |
| DIP 4: LFP Enabled/LFP disabled |
| DIP 5: Force Fibre duplex mode Half/Full |
| DIP 6: PoE Enabled/PoE disabled |
| LED Indicators |
| PWR: Green, lit when +5V power source active |
| FX LNK/ACT: Lit - fibre port link good; Blink - fibre traffic is present |
| TP LNK/ACT: Lit - TP link good; Blinks - TP traffic is present |
| TP SPEED: Green Lit - TP speed 100Mbps; Off - speed 10Mbps |
| PoE PSE-TP: Green Lit - PoE power supply active; Red Lit - PoE power supply disrupted |
| 4W: Green Lit - supplying PD Class 1 power |
| 7W: Green Lit - supplying PD Class 2 power |
| 15.4W: Green Lit - supplying PD Class 0 or 3 power |
| Power |
| 100–240VAC, 47–63Hz/DC 48V (16-60V) internal power supply |
| Maximum consumption: AC 24W/DC 15W |
| Electromagnetic Compatibility |
| FCC Part 15 Class A, CE Mark, C-Tick |
| Mechanical |
| Form Factor: Standalone Desktop/Wallmount all-metal case |
| Dimensions: 133mm x 158mm x 40mm (D x W x H) |
| Weight: 750 grams |
| Environmental Specifications |
| Temperature: 0° to 50°C (Standard Operating) |
| Humidity: 5% to 90% (Standard operating) |