-8%
Teltonika RUTX12 is highly reliable and secure CAT6 Dual SIM 4G LTE router with Dual Band WiFi 5 802.11ac, GNSS and Bluetooth LE module
Teltonika RUTX12 is highly reliable and secure CAT6 Dual SIM 4G LTE router with Dual Band WiFi 5 802.11ac, GNSS and Bluetooth LE module
Original price was: $886.00.$814.00Current price is: $814.00. (inc. of GST)
- Description
- Specifications
- Resources
- Reviews
Description
RUTX12 is the most powerful Dual LTE Cat 6 router in our portfolio.Two simultaneously operational LTE Cat 6 modems provide speeds up to 600 Mbps with load balancing feature.5 x Gigabit Ethernet ports, Wave-2 802.11ac Dual-Band Wi-Fi, Bluetooth LE, and USB interfaces and dual SIM make this device irreplaceable in applications where losing connection is not an option.Packed with advanced security features like VPN, IPsec, PPTP, L2TP, Stunnel and GNSS tracking.
MOBILE | |
|
2 x 4G (LTE) – Cat 6 up to 300 Mbps, 3G – up to 42 Mbps |
|
2 SIM cards, one for each mobile module, auto switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (planned) |
|
Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID, Mobile module in use |
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto replay |
|
Operator black/white list |
|
Possibility to use different PDNs for multiple network access and services |
|
Band lock, Used band status display |
|
Auto APN |
|
Direct connection (bridge) between mobile ISP and device on LAN |
WIRELESS | |
|
802.11b/g/n/ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) |
|
WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation |
|
ESSID stealth mode |
|
Captive portal (Hotspot), internal/external Radius server, built in customizable landing page |
ETHERNET | |
|
1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
|
4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX |
BLUETOOTH | |
|
Bluetooth low energy (LE) for short range communication |
NETWORK | |
|
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) |
|
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL), DLNA |
|
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
|
Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection |
|
Port forwards, traffic rules, custom rules |
|
Static and dynamic IP allocation, DHCP Relay, Relayd |
|
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
|
Supported >25 service providers, others can be configured manually |
|
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover |
|
Balance Internet traffic over multiple WAN connections |
|
Possibility to mount remote file system via SSH protocol (not available in standard FW) |
SECURITY | |
|
Pre-shared key, digital certificates, X.509 certificates |
|
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T |
|
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
|
Port based and tag based VLAN separation |
|
Custom data limits for both SIM cards |
|
Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only |
|
Flexible access control of TCP, UDP, ICMP packets, MAC address filter |
VPN | |
|
Multiple clients and a server can run simultaneously, 12 encryption methods |
|
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC |
|
IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) |
|
GRE tunnel |
|
Client/Server instances can run simultaneously |
|
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
|
Method of building scalable IPsec VPNs |
|
SSTP client instance support |
|
ZeroTier VPN client support |
|
WireGuard VPN client and server support |
MODBUS | |
MODBUS TCP SLAVE | |
|
Respond to one ID in range [1;255] or any |
|
Allow access through WAN |
|
Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality |
MODBUS TCP MASTER | |
|
01, 02, 03, 04, 05, 06, 15, 16 |
|
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII |
MQTT GATEWAY | |
|
Allows sending commands and receiving data from Modbus Master trough MQTT broker |
DATA TO SERVER | |
|
HTTP(S), MQTT, Azure MQTT, Kinesis |
MONITORING & MANAGEMENT | |
|
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
|
Firmware update from server, automatic notification |
|
SSH (v1, v2) |
|
SMS status, SMS configuration, send/read SMS via HTTP POST/GET |
|
Reboot, Status, Mobile data on/off, Output on/off |
|
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem |
|
MQTT Broker, MQTT publisher |
|
SNMP (v1, v2, v3), SNMP trap |
|
Management API over HTTP/HTTPS |
|
Modbus TCP status/control |
|
Teltonika Remote Management System (RMS) |
IoT PLATFORMS | |
|
Allows monitoring of: Device data, Mobile data, Network info, Availability |
|
Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type |
|
Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP |
|
Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server |
SYSTEM CHARACTERISTICS | |
|
Quad-core ARM Cortex A7, 717 MHz |
|
256 MB, DDR3 |
|
256 MB, SPI Flash |
FIRMWARE / CONFIGURATION | |
|
Update FW from file, check FW on server, configuration profiles, configuration backup |
|
Update FW/configuration from server |
|
Update FW/configuration for multiple devices at once |
|
Update FW without losing current configuration |
FIRMWARE CUSTOMIZATION | |
|
RutOS (OpenWrt based Linux OS) |
|
Busybox shell, Lua, C, C++ |
|
SDK package with build environment provided |
LOCATION TRACKING | |
|
GPS, GLONASS, BeiDou, Galileo and QZSS |
|
GNSS coordinates via WebUI, SMS, TAVL, RMS |
|
NMEA 0183 |
|
Supported server software: TAVL, RMS |
|
Get approximate device location on RMS based on mobile cell tower position (without using GPS) |
|
Configurable multiple geofence zones |
USB | |
|
USB 2.0 |
|
Samba share, USB-to-serial |
|
Possibility to connect external HDD, flash drive, additional modem, printer |
|
FAT, FAT32, NTFS |
INPUT/OUTPUT | |
|
1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high |
|
1 x Digital Output, Open collector output, max output 30 V, 300 mA |
|
SMS, Email, RMS |
POWER | |
|
4 pin industrial DC power socket |
|
9 – 50 VDC, reverse polarity protection, voltage surge/transient protection |
|
Passive PoE. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards |
|
Idle: <4 W, Max: <22 W |
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) | |
|
5 x RJ45 ports, 10/100/1000 Mbps |
|
1 x Digital Input, 1 x Digital Output on 4 pin power connector |
|
4 x connection status LEDs, 6 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs |
|
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders |
|
1 x 4 pin DC connector |
|
4 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS |
|
1 x USB A port for external devices |
|
Reboot/User default reset/Factory reset button |
|
1 x Grounding screw |
PHYSICAL SPECIFICATION | |
|
Full aluminium housing |
|
132 x 44.2 x 95.1 mm |
|
540 g |
|
DIN rail (can be mounted on two sides), flat surface placement |
OPERATING ENVIRONMENT | |
|
-40 C to 75 C |
|
10 % to 90 % non-condensing |