Tsw101000000 - myithub
- myithub
- myithub
- myithub
Tsw101000000 - myithub
- myithub
- myithub
- myithub

Teltonika TSW101 – Automotive POE+ Switch, 4x PoE Ports, 5 x Gigabit Ethernet ports with speeds of up to 1000 Mbps

Teltonika TSW101 – Automotive Unmanaged PoE+ Switch, 112W, 4x PoE Ports,

Availability: Out of stock SKU: TSW101000000 Category:

$135.00 (inc. of GST)

Teltonika
Availability: Out of stock

Description

Our first-ever switch for the automotive industry features five Gigabit Ethernet ports with PoE+ support to connect multiple devices to the network and power them up using the same interfaces. Enjoy reliable high bandwidth connectivity in a simple, economical, and easy-to-install solution

  • TSW101 is Teltonika Networks’ first automotive-dedicated unmanaged switch
  • Equipped with five Gigabit Ethernet ports, four of which support IEEE802.3af and IEEE802.3at PoE+ standards.
  • A wide range of supported power supply voltages (9-30 VDC), and a compact size allow it to slot into many automotive applications.
  • Classified as a power source equipment (PSE), this device enables power supply centralization – providing up to 30 watts per single port and maximum output power of 60 watts.
  • 10/100/1000 Mbps Ethernet ports for streamlined, high-bandwidth solutions.
  • Ideal for providing both: in-vehicle power and an Ethernet data connection simultaneously

What’s in it for you?

  • AUTOMOTIVE SWITCH:Ideal for in-vehicle solutions
  • POE+:4 x PoE+ ports with 802.3af and 802.3at support
  • GIGABIT ETHERNE:5 x Gigabit Ethernet ports with speeds of up to 1000 Mbps
  • PLUG-N-PLAY:No configuration needed
  • LOW INPUT VOLTAGE:9-30 V power range for PoE
  • INDUSTRIAL DESIGN:9-30 V power range for PoE
INTERFACES
Ethernet
  • 5 x RJ45 ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE
PoE ports
  • Port 1- 4
PoE standards
  • 802.3af and 802.3at
PoE Max Power per Port (at PSE)
  • 30 W
Total PoE Power Budget (at PSE)
  • 60 W
Maximum Ethernet cable length
  • 100 m
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)
  • 10 Gbps
Packet buffer
  • 128 KB
MAC address table size
  • 2K entries
Jumbo frame support
  • 9216 bytes
POWER
Connector
  • 2-pin industrial DC power socket
Input voltage range
  • 9-30 VDC
Input voltage range for PoE
  • 9-30 VDC
Power consumption
  • Idle: 0.64 W / Max: 2.31 W / PoE Max: 60 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet
  • 5 x RJ45 ports, 10/100/1000 Mbps
Status LED’s
  • 1 x Power LED, 10 x LAN status LED’s
Power
  • 1 x 2-pin industrial DC power socket
Ground
  • 1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material
  • Aluminum housing
Dimensions (W x H x D)
  • 115 x 32 x 95 mm
Weight
  • 354 g
Mounting
  • DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature
  • -40 °C to +75 °C
Operating humidity
  • 10 % to 90 % non condensing
Ingress Protection Rating
  • IP30
SAFETY
Standards
  • EN IEC 62368-1:2020+A11:2020

Datasheet